HOW FLASHING RE SONY XPERIA E3 SINGLE / DUAL USE Flashtool

ABOUT ZENFONE - HOW FLASHING RE SONY XPERIA E3 SINGLE / DUAL USE Flashtool, HOW FLASHING RE SONY XPERIA E3 SINGLE / DUAL USE Flashtool
by ATIAM

Material.

Sony PC Companion, http://support.sonymobile.com/id/tools/pc-companion/

Flashtool, https://drive.google.com/file/d/0B_d8uWGbkaetZVJLRGRBYTFsdEU/view?pli=1



firmware:

- SINGLE SIM (D2202), https://docs.google.com/uc?id=0B52S6qsCApDpNGJsaTlfRnpEVW8&export=download,

- DUAL SIM (D2212), https://docs.google.com/uc?id=0B1oU02TyhZkASHB1Y1M5b0J0Nms&export=download

- SINGLE SIM (D2202 4.4.4), https://docs.google.com/uc?id=0B1oU02TyhZkAREsyU2hkN1dPMFE&export=download

- DUAL SIM (D2212 4.4.4), https://docs.google.com/uc?id=0B1ZkAdq-i__CNjB6V1lKU0wyNUk&export=download



Tutorial.

- Install the Sony PC Companion as usual at your PC.

- Flashtool Download and install on your computer (I installed to local disk C).

- Install Driver, open the folder flashtool (local disk C> Flashtool> Drivers> click Flashtool drivers.exe, then "Next"). Tick ​​enough Fastboot Mode Drivers and Flashmode Drivers, then click "Install", wait until the process is complete.

- Download the firmware (be sure to download the appropriate firmware with HH agan), if it has been input firmware that has been downloaded to the local disk C> Flashtool> Firmware.

- If all is ready, turn off dd, for which bootlop, remove the battery cover, and then there is the OFF button on the bottom of the camera flash, then use a pen or needle puncture to turn off HH.

- Open Flashtool, click the lightning bolt icon, then select "Flashmode" then OK. Select the Firmware her then and then see the "Wipe", uncheck "wipe data" if agan affection with apps and games are already installed, if agan want to restore as new HH buy, check the "wipe data".

- Then click the Flash, wait until a pop-up, "Wait For Flashmode".

- If it appears, press-press the volume down (-) and then hold the button, while plugged into a computer via USB cable. Continue to hold the Volume Down (-) until the image is lost and a new automated process has been running loose.

- Wait until the process is complete, do not be revoked if the process has not been completed.

- After flashing the words "Finished" unplug the device's then blame

Tweet